Trinity Resources - Your Talc & Kaolin Alternative

Versatility in a bright Hydrous Aluminum Silicate!!

ALTIFILTM and ALTIPLUSTM are hydrated aluminum silicate minerals produced from Newfoundland deposits of the mineral pyrophyllite with Al2O3 grades ranging from 18% to 28%. Situated just outside St Johns, Newfoundland, Trinity Resources operates a world class pyrophyllite mine (pic 1) supplying one of the purest aluminum silicate products to industries worldwide.

Trinity Resources recently completed substantial investments in mining infrastructure and advanced processing technology including the latest quality control systems.  Embarking on an aggressive market development strategy, the company has also added experienced team members in operations, sales and general management.

ALTIFILTM and ALTIPLUSTM imparts strength to fired ceramic products and can be used in refractory, ceramics, dinnerware and sanitaryware applications. As a valuable refractory raw material we have the following properties:

-          Permanent expansion

-          Excellent reheat stability

-          Low hot load deformation

-          Low reversible thermal expansion

-          Low thermal conductivity

-          High resistance to molten ingress

The permanent expansion is resulted from dehydration between 650 C and 870 C which corresponds generally to the greatest weight loss and the percentage of expansion on the particle size. When exposed to temperatures above 1050 C a transformation to mullite corresponds to significant increases all aspects of mechanical properties – compression strength, flexural strength and hardness.

ALTIFILTM and ALTIPLUSTM have less than 0.20% iron oxide which imparts exceptionally white characteristics both in raw form and as a fired ceramic product. (pic 2)  While similar chemical structure to talc (a magnesium silicate) ALTIFIL and ALTIPLUS are non plastic yet clay-like and often used in ceramic bodies to decrease thermal expansion and moisture expansion during service.

Because it expands when heated – pyrophyllite counters the shrinkage of the plastic components in a mix. Pyrophyllite-refractory clay combinations have excellent volume stability and resistance to deformation at high temperatures.

In clay bodies, substitution of part or all of the silica will decrease thermal expansion while maintaining the level of maturity (although some adjustments in the feldspar will likely be needed).  Pyrophyllite normally increases firing range and therefore decreases firing shrinkage.  Thus if a body is too vitreous – pyrophyllite can be substituted for feldspar to reduce expansion and maturity at the same time.

In refractory bricks and monolithics ALTIFIL has several advantageous properties. At high temperature it swells and melts to form a glassy surficial coating on the brick which helps prevent ingress of molten metal to the interior.

In electrical porcelain, large amounts (up to 90%) may be used in bodies for optimal electrical properties and high frequency characteristics (where zero porosity is not critical).

In wall tiles, Pyrophyllite can be used as an ingredient since it has the effect of reducing the moisture expansion.

Because of its stable nature and physical properties, pyrophyllite is employed in mold release and parting agents in foundry and structural clay. (See Pic 3,4)

Why is Pyrophyllite ideal for certain types of refractories? It is in the basic properties of the mineral – Pyrophyllite is refractory and no calcining is needed prior to use. Its physical nature (lubricity) is also an advantage with reduced wear on molds and machinery that handle wet and dry product.

In summary, ALTIFIL and ALTIPLUS have versatile applications and can assist your company in replacing Kaolin, Silica, Talc and Feldspar in your application process with price stability.

Products are available in a variety of formats ranging from 1-3mm pebbles (pic 6) down to 2 micron powders. Distributed throughout Canada by Brenntag Canada, Trinity’s products are available in 50-pound bags and big bags from stocking locations in Montreal and Toronto.  Utilizing our ship loading systems (pic 5), we can also bring bulk cargos to market worldwide. In Europe, the United States and Asia Trinity Resources is seeking additional distributors to bring its line of products to end users in the refractory industry worldwide.


Products Include:


ALTIFIL 1-3mm, RG16,  RG140,  RG200,  675,  330

ALTIPLUS 645, 445, 225



Trinity Resources Ltd.

t. 001-709.834.2186.

f. 001-709.834.8856